 |
|
|
|
|
E-1072 Signal Processing Platform |
|
|
| The E-1072 is a software reconfigurable signal processing platform designed especially for array signal processing systems. Multi-channel signals both input and output are sampled synchronously, and high-speed digitized signals are processed on FPGAs and DSPs in parallel. The architecture of the platform is highly suitable to build and develop novel communication systems like MIMO. |
|
| Features |
|
|
| ・ |
The Down Converter converts RF signals to baseband signals,
supporting frequency in the range of 1.5 GHz to 3.8 GHz. |
|
| ・ |
The Up Converter converts baseband IQ signals to RF signals,
supporting frequency in the range of 1.5 GHz to 3.8 GHz. |
|
| ・ |
Five FPGAs are mounted on the AD Converter and the DA Converter
boards respectively, allowing high-speed input and output processing of baseband
IQ signals. |
|
| ・ |
Four DSPs and three FPGAs are cluster connected on the DSP
board, enabling high-speed signal processing in parallel. Two SFP transceivers
supporting Gigabit Ethernet/RocketIO are mounted on the board for achieving high-speed
data transfer. |
|
| ・ |
The AD Converter, the DA converter, and the DSP board are
connected with 128-bit private data bus, achieving high-speed data transfer. |
|
| ・ |
Windows® applications work on the CPU board. Data exchange
can be easily implemented between the CPU board and external devices through Ethernet
LAN, including software reconfiguration for downloading and rewriting on either
DSP or FPGA. |
|
|
|
| Main Specifications |
|
|
| E-1072 Signal Processing Platform |
| Number of Input Channels |
4 Channels (RF) |
| Number of Output Channels |
4 Channels (RF) |
| DSP on Board |
ADSP-TS201S, TS203S |
| FPGA on Board |
Virtex-4 SX55, FX60, LX100 |
| Host Bus Form |
Compact PCI bus |
| LAN Interface |
1000base-T/100base-TX |
| Display Output |
DVI-I |
| Power Requirements |
AC 100 V, 500 VA (50 Hz / 60 Hz) |
| Dimensions |
320(H) x 380(W) x 380(D) mm |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
