An optional USB cable is available for connection to a PC or Mac.
The USB connector can be connected directly to the USB port
on the PC or Mac via the optional USB cable. To enable connection of the AIS transceiver to a PC the USB drivers, You need to download and install the driver from the link below.
Driver installation is typically not required for use with a Mac.
|Output power||1 W or 12.5 W (automatic selection)|
|Display size and type||5 inch, color LCD with adjustable backlight|
|TX / RX frequency||156.025 MHz to 162.025 MHz|
|Chanel bandwidth||25 kHz|
|Receiver channels||32 channels GPS and GLONASS operating modes|
|Frequency||L1 GPS band, 1575.42 MHz and L1 GLONASS band 1597.1 to 1609.5 MHz|
|Sensitivity||< -107 dBm for 20% PER (TDMA Transmitter / Receiver)
-107 dBm@BER < 10-2 (DSC Receiver)
|Position fixing system||EPFS|
|Accuracy||2.5 m CEP / 5.0 m SEP without differential correction
2.0 m CEP / 3.0 m SEP with SBAS or RTCM DGPS correction
|Power supply||10.8V to 31.2V|