HOME > Industrial Electronics Products > SRD-303i

SRD-303iShip's Docking Aid System - Laser Docking Ranger

This laser docking ranger measures and calculates the distance and speed of the ship approaching the berth, providing the operator on the ship with such information on the large-scale display or on the telemeter for bringing the ship alongside the berth free from danger.


Features

Continuous and accurate measurement can be obtained even in rain or fog by short pulse laser system.

The measurement data can be stored and recalled using a hard disk.

Easy installation and maintenance.








Image


Main Specifications

Measuring itemsRelative distance and speed of bow and stern to the berth
Measuring systemShort-pulse laser system
Measuring rangeDistance: -1 to 199 m
Speed: Within ± 99 cm/sec
(+: bearing, -: off-bearthing)
Incoming angle of vessel to the berth: Within 15°
Display systemMeasuring indicator: 15-inch color TFT LCD display
Display itemsDistance: 3 digits in increments of 1 m / 10 cm less than 10 m distance
Speed: 2 digits in increments of 1 cm/sec
Power supply100 VAC (50/60 Hz)
Operating temperature-10 to +50°C (14 to 122°F)

Koden's Drilling Monitors shape up to more intelligent utility device intended for more complex civil and foundation work.The new DM-602RR/604RR with additional functions offer precise measurement, display and recording of perpendicularity of drilled holes and the shapes of cross-sections.


Features

Easier and simpler to operate. You can manipulate the DM-602RR/604RR just like a home appliance.

Gain control switch, auto and manual, is provided.

Clear and precise records make your data reading and analysis easier.

Measurement range and depth data are indicated on the recording paper with wall face marks and numbers.

Furthermore, the recorded data can be output to an external PC via a built-in RS 232C output port.


DM602RR/604RR
DM602RR/604RR


Main Specifications

Recorder unit
Measuring systemUltrasonic echo sensing system
Recording systemDirect recording using the belt
Recording paperElectrosensitive recording paper 250 mm x 20 m (DMP-250)
Measuring range (radius)0.5 m、1.0 m、2.0 m、4.0 m
Measuring accuracy±2% at full scale
Power supply100/110/220 VAC,
50/60 Hz
Operating temperature-10°C to +50°C (14°F to 122°F)
Winch unit
Up/down speed (Continuously controllable from the recording unit)0 to 20 m/min
Up/down movable distance100 m maximum
Bottom and casing sensing systemAutomatic sensing by limit switch
Operating temperature-10°C to +50°C (14°F to 122°F)
Contact:
Please contact Koden

Back to TOP